alTeRNaTe seTUP MeTHod
sections
table of contents
setting your Internet service Provider (IsP) Connection Type to dynamic IP
A dynamic connection type is the most common connection type found with cable modems . Setting the connection type to "dynamic" in many cases
is enough to complete the connection to your ISP . Some dynamic connection types may require a host name . You can enter your host name in the
space provided if you were assigned one . Your host name is assigned by your ISP . Some dynamic connections may require that you clone the MAC
address of the PC that was originally connected to the modem .
(1)
(2)
N+ Wireless Router
1
2
3
(3)
4
5
6
1�
Host Name (1)
This space is provided to enter a host name that needs to be visible to
your ISP . Enter your host name here and click "Apply Changes" (3) . If
your ISP did not assign you a host name, or you are not sure, leave this
blank .
2�
Change WaN MaC address (2)
If your ISP requires a specific MAC address to connect to the service,
you can enter a specific MAC address or clone the current computer's
MAC address through this link .
27
7
8
9
10