Dell 5160 Owner's Manual page 82

To replace the hard drive in the hard drive bay:
1 Follow the procedures in "Before You Begin" on page 79.
2 Turn the computer over, and remove the hard drive screws.
NOTICE:
"Protecting Against Electrostatic Discharge" in the Product Information Guide.
3 Slide the hard drive out of the computer.
4 Remove the new drive from its packaging.
Save the original packaging for storing or shipping the hard drive.
NOTICE:
damage the connector.
5 Slide the hard drive into the bay until it is fully seated.
6 Replace and tighten the screws.
7 Reinstall the operating system, drivers, and utilities.
82
Adding and Replacing Parts
When the hard drive is not in the computer, store it in protective antistatic packaging. See
Use firm and even pressure to slide the drive into place. If you use excessive force, you may
screws (2)
hard drive