periodically touching an unpainted metal surface (such as a connector on the back of the
computer).
19.1
Removing the PC Card Cage
1. Follow the instructions in
2. Remove the hinge cover (see
3. Remove any installed media bay device (see
4. Remove the keyboard (see
5. Remove the display assembly (see
6. Remove the palm rest (see
7. Remove the four M2 x 3-mm screws that secure the PC Card reader to the computer.
PC card reader
screws (4)
NOTICE: To avoid damaging the PC Card reader connector, do not rotate or rock the connector
as you remove it. Use firm and even pressure to lift the pull-tab vertically.
8. Use the pull-tab to disconnect the PC Card reader connector from the PC Card interface board.
9. Remove the PC Card Reader assembly.
Page 91 of 106
TM
Dell
XFR D630 Fully Rugged Notebook Service Manual
B efore You Begin.
2 2 4 H
R emoving the Hinge Cover).
2 2 5 H
K eyboards).
2 2 7 H
R emoving the Display Assembly).
2 2 8 H
R emoving the Palm Rest).
2 2 9 H
X Bay Devices).
2 2 6 H
Revision A01