Table of Contents
Advertisement
T
Security Hot Key
T
Unattended Start
T
Power Management Hot Key
NOTE
a User or Supervisor password. However, more
Setup choices are available with the Supervisor
password.
The Security Submenu lets you check or change the
following password parameters.
NOTE
is "Enabled," the Unattended Start and Security Hot
Key fields are not displayed.
T
User Password
This field allows you to enable a user level password
during POST and to enter Setup. When both the "User
Password is" and "Administrative Password is" are
"Enabled," only the Administrative Password gives you
full access to all Setup fields. This field can be either
"Enabled" or "Disabled." The default is "Disabled."
4-28 NEC Drivers and Utilities
You can enter the Setup program with either
If neither the User or Administrative Password
Advertisement
Table of Contents
