Table of Contents
Advertisement
If you are doing a Full System Recovery, ALL
files on the hard drive will be deleted and
replaced by the factory installed files.
You will
T
lose data
T
need to reinstall any software you installed
yourself.
Full System Recovery should only be used if the
preinstalled software is unusable. If you are unsure
about using this procedure, call the NEC Technical
Support Center (TSC). TSC representatives will help
you determine if this is your situation. See Chapter
7, "24-Hour Information Services..." in this guide for
the technical support telephone number.
The System Recovery requires booting from the CD
Restore disc. Here is the procedure to start the recovery
process. Follow it carefully.
1.
With system power on, insert the CD Restore disc into
the CD-ROM reader.
2.
Turn system power off.
Turn on system power. The System Recovery screen
3.
provides information about the restore process. Read
this information.
You can choose one of the following two options:
T
Continue — Proceeds with the recovery program.
T
Quit — Exits the recovery program back to the
operating system.
4-42 Setting System Parameters
!
CAUTION:
Advertisement
Table of Contents
