Table of Contents
Advertisement
To take advantage of these features, DMI has expanded its
interface in the following areas:
T
Interrupts may be enabled or disabled.
T
High and low limits can be set and are displayed for
temperature and power supply voltages.
T
Current readings are displayed for temperature, power
supply voltages, and chassis state.
T
Interrupts can be detected when "out of range"
conditions occur. User prompts are displayed to alert the
user to a potentially harmful condition.
NEC AUTO BACKUP UTILITY
The NEC Auto Backup utility is a data management and
backup program (available on the NEC Select Install CD)
that operates in conjunction with LANDesk's DMI and the
Self-Monitoring Analysis and Reporting Technology
(S.M.A.R.T) Hard Drive instrumentation. If the
S.M.A.R.T. drive identifies a potential problem, the NEC
Auto Backup utility automatically invokes the Cheyenne
Backup program and backs up the entire file system to a
user-selected backup device, such as a Zip drive, network
drive, or tape.
NEC Auto Backup can also do regularly-scheduled backups
and scan files for viruses during a backup operation.
NOTE
Cheyenne Backup must be preconfigured. See the
NEC Auto Backup utility "Read Me" file for
information about Cheyenne Backup.
2-30 Using NECCSD Utilities
For the NEC Auto Backup utility to work,
Advertisement
Table of Contents
