Language Setting; Line Identification - NEC N223I Using Manual

Table of Contents

Advertisement

Mail and SMS tone (5)
A selected melody number will turn green.
Use the
and
keys to highlight the required melody and then press Softkey 1.
The volume can be adjusted by pressing side keys.
SMS tone volume (6)
The SMS tone volume slider will be shown on your phone's display.
Use the Side
and
keys or
Service tone (7)
Press Softkey 1 to toggle service tone on or off.
Auto answer (8)
The Auto answer facility will cause an incoming call to be connected automatically only if you are using your phone with the simple hands
free kit.
Press Softkey 1 to toggle auto answer on or off.

Language setting

Your phone can display all its menus and other information in a number of languages. To set the required language, use the following
procedure.
Press
6 and 3. The language menu will be displayed. The icon representing the currently selected language will have a
its icon.
Use the
and
keys to highlight the required language icon and then press Softkey 1 to select it.

Line identification

Line identification enables you to choose whether or not to send your own phone number when you make a call and also whether or not to
display a caller's phone number when you receive a call. To set Line identification, use the following procedure.
Press
6 and 7. The Line identification screen is displayed with a
To set the status of each line (see table right), use the
Press Softkey 1 to toggle between the activated and deactivated state.
Press
to save the current settings.
Confirmation window will be displayed if you have made changes and pressed Softkey 2. Press Softkey 1 to enable or Softkey 2 to cancel
to settings.
14
and
keys to set the volume of SMS tone to the level required and then press Softkey 1.
and
keys to select a line (it will turn red when selected).
over an activated line and a
over a deactivated line.
Auto answer will only work if your
phone is working with the simple
hands free kit.
over
The Line identification facility is
network dependent.
Line type
Setting
Outgoing
Send own
Show connected
Incoming
Show incoming
Return own

Advertisement

Table of Contents
loading

Table of Contents