Table of Contents
Advertisement
Chapter 3
S
1
T
ECTION
ROUBLESHOOTING
The following chart provides common problems and possible solutions.
There is a lot of static when calls hand-off
to the repeater.
and/or
The LED on the repeater won't stop
flashing.
Calls won't hand-off to the repeater.
I used to be able to connect to the base, but
now I can't.
When I'm on a call, the handset starts
beeping.
___________________________________________________________________________________
Repeater Guide
Troubleshooting and Maintenance
C
HART
Problem
Try
Moving the repeater closer to the base.
Checking for interference from electronic
devices.
Making sure the repeater is not too close to
metal objects or thick walls.
Making sure the repeater is inside the base's
good signal range.
Making sure there is at least 35 feet between
repeaters.
Resetting the repeater and registering it to the
base again (refer to
Chapter
to a Different Base on page
Making sure the repeater is powered on.
Resetting the repeater and registering it to the
base again (refer to
Chapter
to a Different Base on page
Turning off the verification tone (refer to
Section 2 Turning on the Verification Tone on
page
3-2).
2,
4.3 Registering
2-5.)
2,
4.3 Registering
2-5.)
3 - 1
Advertisement
Table of Contents
