Resetting And Initializing The System; Resetting The System - NEC DSX-160 Hardware Manual
Hide thumbs
Also See for DSX-160:
- Parts list (4 pages) ,
- Quick start manual (2 pages) ,
- Hardware manual (2 pages)
Table of Contents
Advertisement
Resetting and Initializing the System
Resetting and Initializing the System
Resetting the System
To reset the system:
If the system's RS-232 connection uses twisted pair cable, before resetting do one of the following:
•
Make sure the RS-232 cable is connected at both ends (i.e., PC and CPU).
•
If the RS-232 cable is disconnected from the PC, be sure the cable is also disconnected from the CPU.
1.
Briefly press (tap) the Reset Switch on the CPU.
54 ◆ Installation
1
Figure 39: Resetting the System
Important
DSX-80/160 Hardware Manual
Advertisement
Table of Contents
