Grounding The Cabinet; Removing The Right Side Panel - NEC DSX-160 Hardware Manual
Hide thumbs
Also See for DSX-160:
- Parts list (4 pages) ,
- Quick start manual (2 pages) ,
- Hardware manual (2 pages)
Table of Contents
Advertisement
Grounding the Cabinet
Grounding the Cabinet
Removing the Right Side Panel
Remove the cabinet right side panel to gain easy access to the ground lugs and system cabling. The cabinet
has two ground connections: ETH (Earth Ground) and PBXG (PBX Ground).
To remove the right side panel:
1.
Remove the two screws that secure the right side panel to the cabinet.
2.
Carefully slide the right side panel down until it swings clear of the cabinet.
26 ◆ Installation
Figure 8: Removing the Right Side Panel
DSX-80 4-Slot KSU Shown
DSX-80/160 Hardware Manual
Advertisement
Table of Contents
