Table of Contents
Advertisement
Error/Description
Check the USB cable is attached.
Server connection
l
Check that Intellisync icon is
could not be
l
established.
displayed on Windows Taskbar and
is not crossed out.
When link with the
If USB cable is attached and a
server cannot be
l
cross displays on Intellisync icon,
established at start of
Sync session, error
restart Intellisync software.
displays and Sync is
Detach and attach USB cable.
l
canceled.
If all the above steps fail, restart PC
l
and power the phone Off and
power it back On.
Check the password set in the
Invalid user name or
l
SyncML security options screen in
password.
the PC Intellisync software. These
Server has rejected
entries should match the wireless
the user name and
phone user id password.
password.
Retry Sync a couple of times.
Synchronization
l
Reset SyncML logs and retry Sync.
canceled.
l
Power the phone Off, back On, and
There is an error
l
try Sync again.
during Sync.
Check that the total phone entries
l
have not reached full limits. If full,
then start deleting some entries.
Check that "Accept" or "Cancel"
Sync Started or Sync
l
has been selected on te Intellisync
in progress screen is
Accept dialogue box.
displayed for a long
time.
Restart Intellisync and initiate Sync
l
again.
Phone received
some data from
server
Intellisync handles the error and
Device Full. Server
l
"Device Full" message does not
has more than the
maximum amount
appear on the phone.
allowed in the
phonebook,
Scheduler, or To Do
tasks.
Local Sync Resolution*
Remote Sync Resolution*
Check that the wireless phone has
l
service and the service provider is
displayed.
Check that the GPRS icon displays on
l
the phone. If it does not display, check
with your service provider to confirm
you have GPRS service in your area
and that it is enabled.
Check the SyncML configuration. Make
l
sure that the user id and password are
the same as assigned to you by the
Internet service provider. The user id
and passwords are case sensitive.
Retry Sync a couple of times.
l
If you are getting the cancellation
l
immediately after starting, power the
phone Off and back On. The wireless
phone connectivity has to be reset.
The Sync process may take a long time
l
due to poor data rate, bad service, the
number of entries, or the type of Sync
process. If taking a long time, cancel
Sync and try again. Just remember that
the next synchronization will be a full
Sync process after a Sync process is
interrupted or canceled.
Cleanup old and unwanted entries in
l
the remote server.
* Check the resolutions items in sequence
listed.
148
Advertisement
Table of Contents
