Chapter1. Introduction; Overview Of The Product; Features; Led Status - SMC Networks WCB-G2 User Manual

Chapter1.
Introduction

1.1 Overview of the product

The EZ Connect™ g 802.11g Wireless Cardbus Adapter (SMCWCB-G2) gives you the flexibility
to install your notebook PC in the most convenient location available, without the cost of running
network cables.
The adapter's auto-sensing capability allows high packet transfer rate of up to 54Mbps for
maximum throughput, or dynamic range shifting to lower speeds due to distance or operating
limitations in an environment with a lot of electromagnetic interference. It can also interoperate
with all 11Mbps wireless (802.11b) products. Your wireless communications are protected by up
to 152-bit WEP and WPA encryption for high security.

1.2 Features

Complies with IEEE 802.11g, IEEE 802.11b standards
Supports WPA/WPA2 data security, IEEE 802.1x authentication, TKIP/AES encryption,
64/128/152-bit WEP encryption
Supports 54/48/36/24/18/12/9/6Mbps or 11/5.5/2/1Mbps wireless LAN data transfer rates
Provides 32-bit CardBus interface
Supports Ad-Hoc and Infrastructure modes
Supports roaming between access points when configured in Infrastructure mode
Easy to configure and provides monitoring information
Supports Windows 2000, XP
Internal Antenna

1.3 LED Status

LED Indications
Status Green
Activity Green
Status Green
Activity Green
Status Green
Activity Green
SMCWCB-G2
Not lit
Disable Radio
Lit
Lit
The adapter is trying to scan a networking
connection.
Intermittently
Lit
The adapter is transmitting or receiving data.
Flashing
- 1 -
SMCWCB-G2
Working Status
User Guide