SMC Networks WBR14-G3 User Manual page 80

Note: If the above configuration takes effect, to configure to the router by typing
http://192.168.2.1:88
the address field of the web browser.
3) Login to the router, click the "Forwarding" menu on the left of your browser, and
click the "Virtual Servers" submenu. On the "Virtual Server" page, click Add
New, then on the "Add or Modify a Virtual Server" page, enter "80" into the
blank behind the "Service Port", and your IP address behind the IP Address,
assuming 192.168.2.188 for an example, remember to "Enable" and "Save".
Figure A-9: Add or Modify a Virtual server Entry
5. The wireless stations cannot connect to the router.
1) Make sure the "Wireless Router Radio" is enabled.
2) Make sure that the wireless stations' SSID accord with the router's SSID.
3) Make sure the wireless stations have right KEY for encryption when the router
is encrypted.
4) If the wireless connection is ready, but you can't access the router, check the IP
Address of your wireless stations.
(the router's LAN IP address: Web Management Port) in
Figure A-8: Virtual Servers
- 65 -
SMCWBR14-G3 User Guide