SMC Networks 7301TA Installation Manual page 4

Conguring all the PCs on your LAN
If TCP/IP is installed on a Windows 95/98 PC that surfs the
Internet or congures the SMC7301TA, follow the instructions
below. For other operating Systems (Macintosh, Sun, etc.), follow
the manufacturer's instructions.
a. Install a 10/100 Base-T Ethernet network card in the PC.
Follow the manufacturer's instructions.
b. Connect the PC to SMC7301TA LAN port.
c. From the windows 95/98 Start Button, select Settings, then
Control Panel.
d. In the Control Panel, double-click on the Network icon.
e. Check your list of Network Components. If TCP/IP is installed,
go to step i. If TCP/IP is not installed, install it now. Select the
Add button.
f. In the Network Component Type dialog box, select Protocol.
g. In the Select Network Protocol dialog box, select Microsoft.
h. In the Network Protocols area of the same dialog box, select
TCP/IP and click OK. You may need your Windows CD to com-
plete the installation.
i.After you install TCP/IP, go back to the Network dialog box.
Select TCP/IP from list of Network Components.
j. Check each of the tabs and verify the following settings:
- Bindings: Select Client for Microsoft Networks and File and
printer sharing for Microsoft Networks.
- Gateway: All elds are blank.
- DNS Conguration: Select Disable DNS.
- IP Address: Select "Obtain IP address automatically".
k. Reboot the PC. You are now ready to congure SMC7301TA
with Access Router Manager.