Advertisement
WINDOWS NT 4.0
SETTING THE ADSL CONFIGURATION FOR RFC 1483 OR RFC 1577
1.
After your PC has rebooted, right-click on the Mapi Icon,
and select the Configuration option.
2.
The Configuration window appears. This is the Network
Protocol and PVC settings section. Enter in the VPI, VCI, and
Framing values supplied by your ADSL service provider.
3.
In the Select ADSL Mode section, select the mode(s)
recommended by your ADSL service provider. Click on the
mode(s) required and then click on Settings.
NOTE: The service mode type will be one of the following:
q
ANSI T1.413 Issue 2
q
ITU G.992.2 Annex A (G.lite)
q
ITU G.992.1 Annex A (G.dmt)
4.
The PVC Setup window appears. Click Yes to restart your PC
system and to allow the new changes to take effect.
5.
Now you must create a Dial- up Connection. Please go to page 30.
26
I
SMC7003-PCI
NSTALLING THE
Advertisement
