SMC Networks 6900FSC - annexe 1 Management Manual page 136

W -B M
EB ASED ANAGEMENT
Use the Port Trunking Configuration screen to set up port trunks
as shown below:
Parameter
Trunk
Status
Member List
3-50
Description
A unique identifier for this trunk. You can configure
up to five trunks per switch.
Enables or disables the displayed trunk.
You can create up to 12 trunks for the entire stack by
specifying the trunk identifier, switch unit and port
number, and then pressing the "Add" button. Each
trunk can contain from 2 to 4 ports.