System Requirements; Hardware Description - SMC Networks 2635W V2 Quick Installation Manual

System Requirements

To use the SMC2635W, you must have:
• A PC running Windows 98SE/Me/2000/XP.
• A CD-ROM drive.
• A minimum of 32MB RAM and 300MHz CPU.
• A minimum of 10MB available hard disk space for utility
and driver installation.
• Another IEEE 802.11b or 802.11g compliant device installed
on your network such as the Barricade™ g 2.4GHz 54Mbps
Wireless Broadband Router with Print Server (SMC2804WBRP-G),
or another wireless adapter, such as the EZ Connect™ g 2.4GHz
54Mbps Wireless Cardbus Adapter (SMC2835W).
32-bit Cardbus Interface
3
At-a-glance LEDs give you instant
status of network link connection.

Hardware Description

SMC's EZ Connect™ Wireless Cardbus Adapter (SMC2635W)
is an 11Mbps wireless network adapter that seamlessly
integrates with existing Ethernet networks to support
applications such as mobile users or temporary conferences.
This solution offers a high data rate and reliable wireless
connectivity with considerable cost savings over wired LANs
(which include long-term maintenance overhead for cabling).
Just install enough wireless access points to cover your
network area, plug wireless cards into your notebooks,
and start networking.
Using this card in conjunction with SMC 2.4GHz wireless
access points, you can create an instant network that integrates
seamlessly with Ethernet LANs. Moreover, moving or expanding
your network is as easy as moving or installing additional
access points – no wires!
4