Creative ZEN VISION M Manual page 25

Zen Vision Mini PM3.book Page 23 Friday, October 21, 2005 11:39 AM
3 Firmly tap the Vertical Touch Pad and select the check mark
the password. You will be prompted for this password when you select
System → Player Settings and select whether to show or hide the protected
folder.
To disable the password feature or change your password, select System →
4
Player Settings and select the password option.
5 If you forget your password, see "Step 1: Clean Up Your Player's Firmware"
on page 27.
To create a customized equalizer setting
In the main menu, select System → Audio Settings → EQ.
1
Each slider on the Custom EQ screen represents successively higher
frequencies that can be adjusted.
80: controls bass frequency
250: adjusts the low mid-range frequency
1k: adjusts the mid-range frequency
4k: adjusts the upper mid-range frequency
13k: adjusts the treble frequency.
2 Select a slider, and move your thumb up and down the Vertical Touch Pad to
boost or reduce the selected frequency range.
3 Select the check mark
To reset Zen Vision:M to its original firmware settings
In the main menu, select System → Reset Settings → Yes.
When you reset your player's firmware settings, all your player's personalized
settings will be replaced with default settings.
Personalizing Your Player 23
to save and enable the Custom EQ settings.
to confirm