Table of Contents
Advertisement
Monitor
If mounted with the supplied support, the monitor can be removed from the
holder for advanced theft protection.
Removing the monitor:
Push the release button on the back of the support and gently pull the
monitor upwards.
a
Do not push on the display screen to avoid damage of the LCD.
Installing the monitor:
Gently slide the monitor onto the support until it clicks into position.
Replacing batteries of the remote control
You have to replace the batteries of the remote control, if you use the remote
control outside of its holder and the navigation system does no longer respond
to key presses.
Open the battery compartment on
the back of the remote control.
Remove the discharged batteries.
Insert two new LR6 type (Size AA)
batteries. Pay attention to correct
polarity (marked in the
compartment).
Close the battery compartment.
Notes:
a
In many countries exhausted batteries may not be disposed of
with your household waste. Please determine how to dispose of
exhausted batteries according to local regulations.
a
Only use leak-proof batteries. Battery leakage can cause damage
to the remote control or to your car.
a
Never expose the remote control to direct sunlight or extreme
heat. The batteries are discharged and the risk of leakage is
increased.
If you permanently use your remote control in its holder, we recommend that
you remove the batteries from the remote control.
Cleaning of the remote control and the monitor
Do not use lighter fluid, methyl alcohol or other solvents for cleaning. Only use
a damp cloth.
MAINTENANCE
113
Advertisement
Table of Contents
