Map Cds; Changing The Map Cd - VDO MS 3000 Owner's Manual

MAP CDs

Map CDs
The VDO Dayton Navigation System is based on a database stored in a special
format on a CD. It is recommended always to use the latest update of this map
CD.
For pricing and ordering details on map CDs of other countries and areas ask
your authorized VDO Dayton dealer

Changing the map CD

Press the W key on the navigation computer once, if the red power LED is
on (normally when the ignition is switched on).
Press the W key twice, if the red power LED is not on.
:
The CD is ejected.
Take out the CD and gently insert the new map CD with the printed side
facing up until it is retracted.
The system needs a few seconds for initialisation after changing the map
CD.
Notes:
Only use genuine VDO Dayton map CDs. These maps are exclusively designed
for use with the VDO Dayton Navigation System and they are only readable by
a VDO Dayton Navigation System.
The CD player of the navigation system does not play any other CDs
(i.e. Audio CDs).
Always store map CDs in their protective cases.
If the last entered destination address is not (or only partly) on the map CD you
inserted, the whole address (or only the not existing part) is deleted.
112