Calling; Volume Of Call; Dialling; Dialling Via Numeric Buttons - VDO MG 3000 Owner's Manual

Hide thumbs Also See for MG 3000:

Table of Contents

OPERATION

Calling

during a phone call, the volume can be adjusted via the + or - buttons of the remote

control. The last setting selected is stored.

Otherwise, adjustment of the volume is at the mobile phone.

Call numbers to be dialled can be

• entered directly,

• selected from call lists

• selected from the "Navigation" menu (destination call number, where available)

• selected from the list of points of interest (POI browser), if a call number is provided,

• selected from the phone book (on SIM card).

Enter the desired call number in the "Phone" menu via the virtual keypad. After highlight-

ing a button with the cursor and then pressing the OK-button, the digit is shown in the

display zone above (yellow). Wrong entries can be deleted using the "C" button.

1. After entry of the desired call number is complete, press the green handset button.

The connection is now established.

Successful initiation of the connection is indicated by "Phone active" in the menu caption.

Pressing the red handset button terminates the connection.

1 Single or double-digit numbers (1-99) are interpreted as quick-dial numbers, i.e. the

number displayed is replaced by the call number from the corresponding phone book

entry when the green handset button is pressed, see also "Retrieving an entry from the

phone book" on page 15.

Table of Contents

Table of Contents

Mg 3000 c