VDO CD 2202 User Manual page 5

• Electronic antenna/Motorised antenna
Connect pin A5 to the power supply for an
electronic antenna or the control wire for the
replay of an antomatic motorised antenna. Use
the small connector supplied.
Do not use this connection for the supply
lead of the aerial motor!
• Pilot light :
When the car headlights are switched on, the
backlight to the power key remains illuminated
(even when the radio is switched off).
Connect pin A6 to the dashboard illumination
wiring of the car. Use the small connector
provided.
CONNECTOR B (fig.3)
Loudspeakers (use 4 ohm loudspeakers
only)
• Do not connect any of the loudspeaker leads
to earth or directly to a booster/amplifier without
high level input or via an external fader! You
can connect the loudspeaker leads directly to
an amplifier with high level input.
• Connecting 4 loudspeakers:
Front
Left+ Green [B5]
Left- Green/black [B6]
Right+ Grey [B3]
Right- Grey/black [B4]
1
CONNECTOR C
Yellow Connector C1 for Line Out* (fig. 4)
• Connect a power amplifier (with 2 or 4*
additional loudspeaker) to this set with the RCA
cable.
– Connect Red socket to Right channel and white
socket to Left channel.
– Connect Blue wire to Amplifier Remote on/off.
Green connector C2 (fig. 5)
Steering wheel remote control
You can connect certain car steering wheel
mounted remote control to this set via an interface.
Please consult your dealer for the correct
interface.
* Depending on version
6
:
Pink wire (Telephone mute)
• If your car telephone or the car kit of your mobile
– Connect the telephone mute wire to the Pink
– See 'SAM' (page 14); select
Green wire (Navigation mute)*
• If your car navigation computer provides a mute
– Connect the Navigation mute wire to the Green
– See 'SAM' (page 14); select
Blue connector C3 for an analogue compatible
CD changer (available separately) (fig. 6)
• You can only connect an analogue compatible
Rear
White [B7]
White/black [B8]
OTHERS CONNECTIONS
Blue [B1]
Telephone in * (fig.7)
Blue/black [B2]
• You can connect a VDO Dayton hands-free kit
– See 'SAM' (page 14); select
Infrared remote control
You can use a VDO Dayton infrared remote control
with this set. Please consult your dealer for the
correct infrared remote control.
1
phone provides a mute signal, it can be used to
automatically interrupt the set's sound output.
lead wire.
option 'TEL' and set 'MUTE LO' or 'MUTE HI'
(according to phone type) to automatically
interrupt the set's sound output when using
your car phone.
signal, it can be used to automatically interrupt
the set's sound output during voice guidance.
lead wire.
option 'NAV' and set 'LOW' or 'HIGH' according
to the navigation computer's mute signal.
CD changer to this set (see mounting
instructions for the CD changer).
(available separately) via the connector D. See
mounting and connecting instructions for the
hands-free kit.
option 'HFREE' and set 'HFREE LO' or 'HFREE
HI' (according to phone type) to automatically
interrupt the set's sound output when using
your car phone.
C connectors belong to accessories sold
separately. For more information, see your
dealer.