Listening To Your Iphone Or Ipod - Altec Lansing IMT800 User Manual

1
Dock your iPhone or iPod in the
Altec Lansing Mix speaker system.
Make sure the correct adapter for
iPhone or iPod is inserted in the
speaker system's dock. Slide the guard
down to protect the iPhone or iPod.
2
Select "iPod" mode.
Press the "SOURCE" button on your
speaker system or clip-on remote until the iPod icon appears on
the LCD.
3
Press the button on your iPhone, iPod, or clip-on remote.
Music from your iPhone or iPod will start playing. The speaker system
and the clip-on remote are capable of controlling basic functions of
3rd-generation iPod models, the iPod touch, the iPod nano and the
iPhone.
4
Adjust the volume.
Rotate the knob on the Altec Lansing speaker system to adjust the
system volume. Or, use the "+"and "–" buttons on the clip-on remote.
5
Find your desired song.
Press the or button on your speaker system or clip-on remote to
go to the next or previous track. Press and hold the
your speaker system or clip-on remote while the track is playing for
high-speed forward or reverse music search of the current track.
NoTe To conserve battery power, reduce the speaker system volume level.
NoTe During battery-only operation, the speaker system automatically
shuts down if no audio is detected for a few minutes. This is to conserve
battery power. Press the
on the clip-on remote to turn the speaker system back on.
NoTe The speaker system is compatible with the alarm clock and sleep
timer features built into select iPhone and iPod models. For these features
to work properly, the speaker system must be connected to a wall outlet.
When an iPhone or iPod is docked, the speaker system will not shut down
automatically, enabling the alarm or sleep timer to play through the speaker
system. See the user guide for iPhone or iPod for details on how to access
these features.
NoTe During AC operation, if there is no iPhone or iPod docked and
no audio input signal is detected for a few minutes, the speaker system
automatically shuts down to conserve energy. Press the
speaker system or the
system back on.
or button on

Listening to Your iPhone or iPod

button on the speaker system or the
button on the clip-on remote to turn the speaker
button
button on the
11