General Problems - Dell W3202MH Owner's Manual

General Problems

Problem
Poor picture quality while watching TV
and using a device such as a DVD
player or a VCR
Poor picture quality when using a
device connected to the TV IN
(coaxial) connector
32
Troubleshooting Your TV
Possible Solution
Check the aspect ratio settings in the TV Menu. Press the Menu
1
button and select Size. For more information on using the TV
Menu, see "Using the TV Menu" on page 23.
Connect the device using a different connector. For example, if
2
you are experiencing the problem using a composite connector,
try using the component connector.
NOTE:
To connect to a different connector, you need the
appropriate cables for that connector. See your device
documentation for a list of supported connections.
After you connect the device, change the input source in the TV
Menu. See "Input Select" on page 24 for more information.
Reset the original factory defaults. Press Menu button, select
3
Setup, and then select Factory Reset.
Adjust the color temperature. Press Menu button, select Picture
4
Settings, and then select Color Temperature.
NOTE:
Some set top boxes offer aspect ratio. See your device
documentation for more information.
Ensure TV is selected as the input source in the Input Select
1
menu. See "Input Select" on page 24 for more information.
Press Menu buttton, select Setup, and then select Channel
2
Setup. This resets the channels on your TV.
Check the aspect ratio settings in the TV Menu. Press the Menu
3
button and select Size. For more information on using the TV
Menu, see "Using the TV Menu" on page 23.
Reset the original factory defaults. Press Menu button, select
4
Setup, and then select Factory Reset.
Adjust the color temperature. Press Menu button, select Picture
5
Settings, and then select Color Temperature.
The problem may be with your device, contact your service
6
provider.