Daily Use - Jabra GO 6430 Quick Start Manual

note: The headset and USB Bluetooth Adapter
are paired at the factory, so you should not need
to pair them. Please see the Jabra GO™ 6430 User
manual for details on how to pair with a new
adapter or to re-establish pairing, if needed.
2. Right-click on the Jabra icon in the Windows
Notification Area and select open device service.
The Jabra Device Service window opens. This shows
the list of softphone drivers installed on your PC.
Use the online help available in this window to
learn more.
3. Select the softphone you want to use (target
softphone) from those available in the select
softphone for outgoing calls drop-down list.
4. Run the Jabra Control Center — click on the Windows
Start button and select All Programs > Jabra > Jabra
PC Suite > Jabra Control Center.
5. Select the Softphone tab for your Jabra GO device.
6. In target softphone for outgoing calls, select either
Microsoft office Communicator or softphones
supported by Jabra PC suite. Configure other
parameters, as required.
This establishes the default softphone target type.
Use the online help available in this window to
learn more.
Us

DAILY USE

to make a call:
1. Dial the number as usual, using your standard
mobile-phone keypad or softphone interface.
2. Press the call button on your mobile or softphone.
The audio connection to your headset opens
automatically.
3. To hang up, either tap the headset multifunction
button or click on the end-call button of your mobile
phone or softphone.