The Under Braider - Braiding - Singer NO. 27 Instructions For Using Manual

Fit the quilter foot, as shown.
To attach the under braider, draw the front and back slides that cover the shuttle, and insert
the downward projecting parts of the attachment against the edge of the throat plate. Close
first the back slide, then the front, so that the end of the front slide will enter the turned under
part of the attachment and hold it firmly in position.
The pattern or design to be braided must be stamped or traced on the wrong side of the
material. Pass the end of the braid through the guide of the under braider and then under the
needle. Place the material, wrong side up, above the braid, lower the presser foot and pro-
ceed to sew, following the lines of the design.
27 & 28

The Under Braider - Braiding

31