The Binder - Binding; To Bind With Dress Braid; To Make French Folds - Singer NO. 27 Instructions For Using Manual

Pass the binding through the scroll of the binder and draw it under the needle. Place the edge
of the material to be bound between the scroll of the binder and under the needle, lower the
presser-bar lifter and sew as usual.
Bias binding should be cut 15/16 of an inch wide.
To Bind with Dress Braid. - Proceed as when using bias binding; but as dress braid and
binding purchased already folded are narrower than bias binding they should be inserted in
the outer slot of the binder. The edges of dress braid are not turned under as in the case of
bias binding.
To make French Folds. Proceed as directed for binding, but pass the cloth beneath the
binderfoot, so that the fold is stitched on to the face of the material instead of on the edge.
27 & 28

The Binder - Binding

21