Singer 4830 Instruction Manual page 31

Buttonholes
Recommended settings:
Stitch Selection: Buttonhole Stitch
Stitch Width: Pre-set
Foot: Buttonhole (L)
Needle Plate: General Purpose (A)
Step 1
• Raise presser foot.
• Place fabric under foot
• Centre 3 red guidelines (1) of foot around
beginning line of buttonhole.
• Turn buttonhole dial to the buttonhole
symbol (1) for the first step
• Position needle in fabric at point (2) by
turning the hand wheel towards you.
• Stitch down to point (3).
Step 2
• Raise needle out of fabric.
• Turn buttonhole dial to the buttonhole sym-
bol (2) for the second step.
• Make at least four stitches ending at
point(4).
4830 & 4832
31