Threading The Machine - Singer 4830 Instruction Manual

4830 & 4832
• Raise take-up lever to highest posi-
you.
• Raise presser foot to release thread
• Place spool of thread on spool pin.
• Slide spool cap firmly over rim of
• Lead thread from spool and snap
guide and through the slot, as illus-
• Thread the tension discs by leading
sion (3). Hold the spool lightly and
pull the thread up, lifting the spring
and allowing the thread to dip into
• Slip thread into take up lever as
• Pass thread through guides (5) and
• Thread needle from front to back,
pulling 4" (10 cm) of thread through
14

Threading the machine

tion by turning hand wheel toward
tension.
spool to prevent thread tangling.
into thread guide (1) and with only
one hand pass the thread under the
trated (2)
the thread down and around the tor-
thread guard.
illustrated (4).
(6).
eye (7).