A/V Presets - NAD T765 HD Owner's Manual

A/V PRESETS

The T 765's simple but powerfully flexible system of 'Presets' allows you to customize virtually every
aspect of your audio-video playback, and recall them with a single key-press. The parameters 'Listening
Mode, ' 'DSP Options' and 'Tone Controls' accessible via the 'Main Menu' together with 'Speaker Setup
and 'Display Setup' configurable through 'Setup Menu' are stored together as a Single Preset.
You might create one Preset optimized for pop music and another for classical. One more Preset can be set
up to recall each family member' s favorite setting or one for fully cinematic home-theater playback and yet
another one for late-night movies, with each Preset fine-tuned to a particular scenario or preference.
CREATING PRESETS
Creating a Preset consists simply of storing a complete set of the parameters set forth in the 'Listening
Mode, ' 'DSP Options' and 'Tone Controls' accessible via the 'Main Menu' together with 'Speaker Setup
and 'Display Setup' configurable through 'Setup Menu. '
Scroll to 'A/V Presets' using the keys to save a collection of said parameter settings to a Preset.
Select a Preset number and by a combination of pressing the
the particular Preset any of the above-mentioned parameter settings by choosing 'Yes' . If you decide
not to include in the particular Preset a certain parameter setting, select 'No' .
Now in order to save the settings chosen for the particular Preset number, scroll down to 'Save Current
Setup to Preset' and press the key. If you chose to load instead the default settings, scroll down to
'Load Defaults to Preset' and press the
In addition to the parameter settings, the Preset label itself can be assigned a new name. This new
Name will be shown in the VFD as well as on the OSD.
To rename the Preset label, scroll to 'Name' and press
and select through the alphanumeric selections. Press
the previous character and at the same time save the changes done on the current character.
NOTE
The selected Preset remains in force until you select a different Preset.
RECALLING PRESETS
You may recall a Preset at any time using the HTR 3 remote control. Press the HTR 3's square AVPS key
and then the numeric key 1-5 corresponding to the desired preset number. The newly recalled Preset
will then manifest or replace the previous Preset (if any).
keys, you can selectively include in
key to restore the default settings.
to go the character. Then, press
to move to the next character or back to
USING THE T 765 – SETUP MENU
to pick
OPERATION
1