Advertisement
S U P E R M O T O M O T O R C Y C L E
SUPER
MOTO
SUPERMOTO S2
WORLD CHAMPIONS
CONSTRUCTOR
RIDER
TECHNOLOGY = DESIGN
On the SXV, your gaze is inevitably attracted to superb technology in the form of its V2 engine, mixed trellis and aluminium frame, and sculptured
swingarm. The design of the tail and rear side panels abandons traditional enduro styling and is totally innovative, just like the centrally mounted
exhaust system with twin tail pipes under the rear mudguard. In fact, innovative design solutions catch your eye whichever way you look at the
RSV and SXV, and Aprilia Racing colours confi rm that these bikes are born to compete. And as always with Aprilia, good looks are just the outward shell
of ingenious design solutions. The fi xed air guides for example, allow the fuel tank to pivot upwards, giving easy access to the fi lter box.
DIGITAL INSTRUMENTATION
Compact, ultra-lightweight digital
instrumentation for all the information
you could possibly need.
FUEL TANK
Capacity 7.8 litres.
GEARBOX
5 speed. Supermotard gear ratios:
1° 13/30, 2° 15/27, 3° 16/23, 4° 20/23, 5° 21/21
CLUTCH
Cable operated multi-plate wet clutch.
PRIMARY DRIVE
Spur gears. Transmission ratio: 22/56.
FINAL DRIVE
Chain. Transmission ratio: 15/48 (16/46).
SWINGARM
The variable section aluminium swingarm is the most rigid swingarm on
any motorcycle of this type. Rising rate linkages operate a Sachs multi-
adjustment monoshock with piggy-back cylinder and double high/low
speed settings.
S1V5.5
549cc V77° TWIN
TAIL LIGHT
High luminosity LED
S2V4.5
tail light.
EXHAUST SYSTEM
449cc V77° TWIN
Twin tail pipes under rear
mudguard.
FRONT SUSPENSION
Ø 48 mm upside down hydraulic fork with
double adjustment, calibrated differently
for the supermotard and enduro. The fork
REAR SUSPENSION
is fully adjustable, so that you can set up
Box section aluminium
your own suspension action exactly as you
swingarm with cast body.
want it.
Hydraulic monoshock with
compression and rebound
adjustment.
SXV SWINGARM
The SXV is equipped with a wider swingarm to
allow the bike to fi t rear wheels of up to
6.5 inches
BRAKES
The unrivalled technology and performance
of the chassis are supported by a fantastic
braking system.
DIMENSIONS
HANDLEBARS
Overall length: 2,220 mm
Variable section aluminium
Overall width: 800 mm
handlebars with no cross bar for
Ground clearance: 318 mm
perfect elasticity and control.
Seat height: 918 mm
Wheelbase: 1,495 mm
TYRES
WHEELS
Front: 120/70 x 17"
Light alloy.
Rear: 180/55 x 17"
Front: 3.50 x 17"
Rear: 5.50 x 17"
• The brakes on the SXV are designed for sheer
power and feature a 320 mm fl oating disc with a
radial caliper for GP-level braking performance.
• The 240 mm rear disc and single piston caliper
provide the perfect balance between stopping power
and ease of control.
Advertisement
