Main Independent Controls - APRILIA RS 125 - 1995 Manual

MAIN INDEPENDENT CONTROLS

CONTROLS ON THE LEFT SIDE OF THE
c
HANDLEBAR (Fig. 5)
The electrical parts work only when the
ignition switch is in position "
1) DIMMER SWITCH (
When the light switch ("CONTROLS ON THE
RIGHT SIDE OF THE HANDLEBAR" - page 21) is
o
in position " ", if the dimmer switch is in position
a
" " the high beam comes on, while if it is in posi-
b
tion " " the low beam comes on.
20
n
".
a b
- )
Fig. 5
2) DIRECTION INDICATOR SWITCH (
To indicate the turn to the left, move the switch to
the left; to indicate the turn to the right, move the
switch to the right.
To turn off the direction indicator, press the switch
on its centre.
3) HIGH BEAM SIGNALLER PUSH BUTTON (
This push button makes it possible to use the high
beam signaller, which is useful to send signals to
the forthcoming vehicles when passing and in
case of danger or emergency.
4) HORN PUSH BUTTON (
The horn is activated when the "
pressed.
5) COLD START LEVER (
The starter for the cold start of the engine is oper-
ated by rotating the cold start lever downwards.
To disconnect the starter, rotate the lever com-
pletely upwards.
6) MULTIFUNCTION COMPUTER PUSH BUTTON
(LAP)
It makes it possible to use the chronometer of the
multifunction computer, (see pages 26 28).
c
)
a
f
)
f
" push button is
e
)
)