ZyXEL Communications WAP3205 - QUICK GUIDE V2.0 Quick Start Manual page 9

Wireless n access point
Hide thumbs Also See for WAP3205 - QUICK GUIDE V2.0:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
1. Make sure your WAP3205 is turned on (A). Place
your wireless device within range of the WAP3205.
2. Press the WPS button for two to three seconds on
the WAP3205 as well as the WPS button on the
wireless adapter connected to your notebook (B). It
doesn't matter which button is pressed first. You
must press the second button within two minutes of
pressing the first one.
The WPS LED (
WPS process, then shines steadily when the WPS
process is finished.
If your WPS connection is successful, you should
now be able to access the WAP3205.
3. Connect a LAN port (C) on your WAP3205 to your
broadband modem. You are now ready to connect to
the Internet wirelessly through your WAP3205.
If your wired Internet connection is fine but your
wireless connection is not, repeat step 3. If WPS
is not working or your wireless device does not
support WPS, go to the next section.
) on the WAP3205 blinks during the
ENGLISH
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents