Disk Group And Virtual Disk Expansion; Disk Group Expansion - Dell POWERVAULT MD3620I Owner's Manual

• All mappings are defined.
NOTE:
However, any hosts that are mapped to the secondary virtual disk has read-
only access until the virtual disk is promoted to a primary virtual disk, or the
mirror relationship is removed.
Storage partitioning topology is the collection of elements, such as Default
Group, host groups, hosts, and host ports shown as nodes in the Topology
pane of the Mappings tab in the AMW. For more information, see "Using the
Mappings Tab" on page 100.
If a storage partitioning topology is not defined, an informational dialog is
displayed each time you select the Mappings tab. You must define the storage
partitioning topology before you define the actual storage partition.

Disk Group and Virtual Disk Expansion

Adding free capacity to a disk group is achieved by adding unconfigured
capacity on the array to the disk group. Data is accessible on disk groups,
virtual disks, and physical disks throughout the entire modification operation.
The additional free capacity can then be used to perform a virtual disk
expansion on a standard or snapshot repository virtual disk.

Disk Group Expansion

To add free capacity to a disk group:
1 In the AMW, select the Logical tab.
2 Select a disk group.
3 Select Disk Group Add Free Capacity (Physical Disks).
The Add Free Capacity window is displayed. Based on the RAID level, and
the enclosure loss protection of the current disk group, a list of unassigned
physical disks is displayed.
NOTE:
the expansion enclosure has enclosure loss protection, Display only physical disks
that ensures enclosure loss protection is displayed and is selected by default.
4 In the Available physical disks area, select physical disks up to the allowed
maximum number of physical disks.
148
Configuration: Disk Groups and Virtual Disks
You can include a secondary virtual disk in a storage partition.
If the RAID level of the disk group is RAID level 5, or RAID level 6, and