Changing The Virtual Disk Modification Priority - Dell POWERVAULT MD3620I Owner's Manual

5 In Advanced virtual disk parameters, you can select:
• Use recommended settings.
Customize settings.
•
6 If you select Use recommended settings in Advanced virtual disk
parameters, click Finish. Otherwise, click Next.
7 In the Customize Advanced Virtual Disk Parameters window, select the
appropriate Virtual Disk I/O characteristics type. You can select:
• File system (typical)
• Database
• Multimedia
• Custom
NOTE:
8 Select the appropriate Preferred RAID controller module ownership.
9 Click Finish.
The virtual disks are created.

Changing the Virtual Disk Modification Priority

You can specify the modification priority setting for a single virtual disk or
multiple virtual disks on a storage array.
Guidelines to change the modification priority of a virtual disk:
• If more than one virtual disk is selected, the modification priority defaults
to the lowest priority. The current priority is shown only if a single virtual
disk is selected.
• Changing the modification priority by using this option modifies the
priority for the selected virtual disks.
To change the virtual disk modification priority:
1 In the AMW, select the Logical tab.
2 Select a virtual disk.
3 In the toolbar, select Virtual Disk Change Modification Priority.
The Change Modification Priority window is displayed.
116
Configuration: Disk Groups and Virtual Disks
If you select Custom, you must select an appropriate segment size.