ZyXEL Communications P-662HW-D - QUICK GUIDE V3.40 Quick Start Manual page 7

A) Check the lights on the front panel. If they are different from what is described in section 1, make sure
the connections are correct. (See section 1.) If the lights are still different, turn off the device, wait a few
seconds, and turn it on again.
B) Follow the steps in section
account has a user name and password, make sure you type it correctly. In addition, if you are not sure
which encapsulation your ISP uses, contact your ISP.
C) If you are using a new Internet account, contact your ISP to make sure it is active.
D) If you still have problems, see Troubleshooting in the User's Guide.
3 If you cannot access the Internet using the wireless network, follow these steps.
A) On a computer in the wireless network, open your browser, and go to http://192.168.1.1. If you see the
screen in step 3
B) Make sure your P-662HW-D and your computer are using the same settings. Follow the steps in section
3.
Viewing Your Product's Certifications
1 Go to www.zyxel.com.
2 Select your product from the drop-down list box on the ZyXEL home page to go to that product's page.
3 Select the certification you wish to view from this page.
P-662HW-D Series Quick Start Guide
3 again. Make sure you enter the correct information. For example, if your
of section 3, follow suggestions A - D above. If you do not, go to the next step.
7