Wizard Setup: Screen 3; Figure 12 Wizard 2: L2Tp Encapsulation; Table 7 Wizard 2: L2Tp Encapsulation - ZyXEL Communications P-330W - V1.90 User Manual

Figure 12 Wizard 2: L2TP Encapsulation

The following table describes the fields in this screen

Table 7 Wizard 2: L2TP Encapsulation

LABEL
Attain IP
Automatically
Set IP Manually
IP Address
IP Subnet Mask
Default Gateway
Server IP Address
User Name
Password
Cancel
Back
Next

4.3 Wizard Setup: Screen 3

Set up the basics of your wireless LAN using the third wizard screen.
P-330W User's Guide
DESCRIPTION
Select this if your ISP automatically assigns you an IP Address.
Select this if your ISP has assigned you a fixed IP address.
Type the (static) IP address assigned to you by your ISP.
Type the subnet mask assigned to you by your ISP.
Type the default gateway assigned to you by your ISP.
Type the IP address of the L2TP server.
Type the user name given to you by your ISP.
Type the password associated with the User Name above.
Click Cancel to abort the setup wizard.
Click Back to return to the previous screen.
Click Next to continue.
Chapter 4 Wizard Setup
43