Table of Contents
Advertisement
Chapter 3 MAX-506 Utility
3.7 Network Settings
The authentication settings required for this screen are required for using the
MAX-506 to connect to your Internet Service Provider's WiMAX network. Use the
settings given to you by the ISP. If you do not configure this screen, then you will
not be able to access a WiMAX network.
To display this screen click the Network Setting icon in the control panel.
Note: When you change your network settings, there is a 10-second delay until the
changes take effect after you click Apply.
Figure 10 Network Settings Screen
The following table describes the labels in this screen.
Table 8 Network Settings
LABEL
Username
Password
28
DESCRIPTION
Enter the user name associated with your WiMAX account.
Enter the password associated with your WiMAX account.
MAX-506 User's Guide
Advertisement
Table of Contents
