Printing Photos From A Pictbridge-Enabled Digital Camera - Dell All-in-One Wireless Printer P713w User Manual

Dell all-in-one wireless printer user's guide
Table of Contents

Advertisement

c
Transfer or print the photos:
Fast Pics launches automatically when a connection is established. Follow the instructions on the
computer screen to transfer the photos to the computer or to print.

Printing photos from a PictBridge-enabled digital camera

PictBridge is a technology available in most digital cameras that lets you print directly from your digital camera
without using a computer.
1
Insert one end of the USB cable into the camera.
Note: Use only the USB cable that came with the camera.
2
Insert the other end of the cable into the PictBridge port on the front of the printer.
Notes:
Make sure that the PictBridge-enabled digital camera is set to the correct USB mode. If the camera USB
selection is incorrect, then the camera is detected as a flash drive, or an error message is displayed on the
printer control panel. For more information, see the camera documentation.
The printer reads only one memory device at a time.
3
If the PictBridge connection is successful, then the following message appears on the display: Camera
Connected. Use Camera to choose and print photos.
Warning—Potential Damage: Do not touch any cables, any network adapter,
any connector, the memory device, or the printer in the areas shown while
actively printing, reading, or writing from the memory card. A loss of data can
occur.
Printing
41

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

P713w all in one photo printer

Table of Contents