Table of Contents
Advertisement
Volume adjustment
In all modes the volume control works the same.
To decrease the volume, slide the volume control to the left.
•
To increase the volume, slide the volume control to the right.
•
Radio mode
Slide the function selector (14) to radio mode. The radio tuner will now be activated. Slide the
band selector in the desired frequency range.
AM
•
FM
•
FM ST.
•
Tuning
Select the desired radio frequency by turning the tuning knob (10). Turn to the left for frequency
down, turn to the right for frequency up.
CD/MP3 Mode
Press on the top cover of the main unit on the "open" button. Wait until the CD door is opened
fully. Now you can insert a CD into the loader (label up). Close the CD door by pressing the
"open" button. Push the function selector (14) into CD/MP3 mode. Now the unit will start to read
and play the CD content.
Basic controls
Play / Pause button (12)
Skip + (7)
Skip – (6)
Stop (13)
Album (11)
USB Mode
It is possible to play the content of a USB device (see specifications for the supported formats).
To play a USB device:
Make sure that the CD compartment is empty.
•
Plug in the USB devise to the USB slot on the unit.
•
Slide the function selector switch into CD/MP3 mode.
•
Press and hold the play/pause button for 3 seconds to enter the USB mode.
•
Playback will start automatically.
•
Program function (CD/MP3/USB)
It is possible to program files into the units' memory. Once programmed the unit will only playback
the files that you have programmed. From a normal audio CD it is possible to program up to 20
files. Of a MP3 disc or USB devise it is possible to program up to 99 tracks. To start programming
insert a CD or USB device and stop the playback.
1. Press mode button, the display will now show P01
2. Select the desired track by using skip + & - buttons (use album button to flip between
folders, if available).
3. Press mode button to confirm the program.
4. Repeat step 2+3 until all the desired tracks have been programmed.
5. Once the desired tracks have been programmed press play to start the program playback.
6. Press stop twice to stop the programmed playback.
for AM reception
for FM mono reception
for FM stereo reception
Press this button to start or pause CD playback.
When pressing in play mode the playback will pause, press
again to resume playback.
Press to go to the next track, press and hold for fast forward.
Press to go to the previous track, press and hold for fast rewind.
Press to stop the CD playback.
Press this button to flip between the different folders.
Note: This works only with MP3 CD's that contain folders.
8
Advertisement
Table of Contents
