Specifications - LENCO MC-140 Instruction Manual

4. Cleaning a disc
Should the disc become soiled, wipe off dust, dirt and fingerprints with a soft cloth.
The disc should be cleaned from the center to the edge.
Never use benzene, thinners, record cleaner fluid or anti-static spray.
Be sure to close the CD door, so the lens is not contaminated by dust.
Do not touch the lens.

SPECIFICATIONS

GENERAL
Power Requirement
Remote Handset
Power consumption
Weight
Unit Dimensions
Dimensions of Each speaker
Operation temperature
RECEIVER SECTION
Receiving Bands
Tuning Range
COMPACT DISC SECTION
Optical Pickup
Frequency Response
AUDIO SECTION
Power output
Headphone Impedance
ACCESSORIES
Instruction Booklet
Remote Handset
Specifications are subject to change for continuous improvement, we reserve the rights to modification
without prior notice.
ESD Remark (I1): In case of malfunction due to electrostatic discharge just reset the product (reconnect
of power source may be required) to resume normal operation.
If at any time in the future you should need to dispose this product please note that
Waste electrical products should not be disposed of with household waste. Please
recycle where facilities exist. Check with your Local Authority or retailer for
recycling advice. (Waste Electrical and Electronic Equipment Directive).
AC 230V
DC 3V UM-4size x 2
AC 20 Watts
Approx. 2.4 kg
Approx.175mm (L) x 204 mm (W) x 135mm (H)
Approx.110mm (L) x 178 mm (W) x 135mm (H)
+5°C +35° C
AM/FM
AM 530 - 1600 KHz
FM 87.5 - 108 MHz
3-Beam Laser
100Hz - 16KHz
Maximum 2 Watts x 2
32 Ohms
1
1
9