LENCO IR-2100 - MANUEL 2 User Manual page 18

1. After select the 'Backlight' menu item, the radio will display its list of three menu modes:
'Inactive', 'Active' and 'Standby'. These three states are explained below:
. The radio gets into its 'inactive' state when there is no user activity for 30 seconds.
. The 'active' state is when there is user activity.
. 'Standby' is the state when the radio has been turned off
2. Press Tune Up or Down to highlight the desired menu mode and press SELECT.
3. The radio will now display the current backlight value for the menu mode. You can alter this
value by pressing Tune Up or Down to increase or decrease it.
<WiFi Strength>
Selecting this option will see the WiFi strength of Receiver;
After select the 'WiFi Strength ' menu item, the radio will display its the WiFi strength of Receiver in
percent .
<Deemphasis>
In this menu you can enable or disable the Deemphasis (default is OFF)
Menu list: Configure\Deemphasis\ 1, OFF; 2, ON
-17-