LENCO IR-2100 - MANUEL 2 User Manual page 15

following:
a. Keep pressing BACK to get to the radio's top-level menu and then press Tune Up or
Down to select 'Media Player'.
b. Press SELECT and then press Tune Up or Down to highlight ' UPnP Serves'.
c. Press SELECT and the radio will scan for all available UPnP servers . Note, this may
take a few seconds for the radio to complete its scan and before the scan has completed,
the radio will display '[Empty]'. The radio will continue to display '[Empty]' if no UPnP
servers and found.
d. After a successful scan. Select your UPnP server, by pressing Tune Up or Down if there
is more than one UPnP server, and then press SELECT (note, your radio will display'
Access Denied' at this stage)
4. Your PC will now prompt you that a device has attempted to connect to your UPnP server. In
order to allow the radio to have access to the media files, you will need to click the 'Library' tab
from Windows Media Player 11 and select the 'Media Sharing...' item to open the 'Media
Sharing' window.
Selecting 'Media Sharing...' for Windows Media Player11 :
-14-