Device With I.link - Sony BRAVIA KDL-32XBR950 Operating Instructions Manual

Device with i.LINK

Using i.LINK Cables
This TV has three S400 i.LINK terminals (one in the front panel, and two in
the back panel). You can use the following i.LINK cables with this TV:
4-pin i.LINK cable
Do not use cables other than the i.LINK cables listed above.
Connecting i.LINK Devices
Before connecting this unit to i.LINK-compatible equipment,
read the instruction manual of the i.LINK device to be
connected.
To connect a digital i.LINK device (using only a digital signal)
1
Using an i.LINK cable (see page 51), connect the device's i.LINK jack
to either of the TV's i.LINK jacks.
To connect an i.LINK device that supports an EIA-775A connection
1
Using an i.LINK cable (see page 51), connect the device's i.LINK jack
to either of the TV's i.LINK jacks.
2
Using an A/V cable, connect the i.LINK device's A/V output jacks to
the TV's A/V input jacks (VIDEO 3).
Only one i.LINK cable should connect the TV and any given
i.LINK device.
Sony Model Length
VMC-IL4415 1.5 meters
VMC-IL4435 3.5 meters
(Continued)
51