Sanyo VCC-HD2100 User Manual page 108

Operation
Restarting camera
Restoring factory default
settings
Restoring factory default
back focus position
Resetting login password
Adjusting focus
Adjusting iris
Viewing Firmware Version
This bracket may be attached to either the top or bottom face of the camera depending on the installation
environment.
For bracket installation, be sure to use the longer screws supplied.
Install the camera securely to a durable location, taking into account the total weight of the camera
mount (commercially available) and the camera.
Associated button and use
Press the RESET button.
Press the NEAR and SET buttons
simultaneously.
Press the NEAR and FAR buttons
simultaneously.
Press the FAR and SET buttons
simultaneously.
For details, refer to the "Lens
Adjustment" section.
For details, refer to the "Viewing
Firmware Version" section.
Equivalent network operation
screen
OPTION SETTINGS (CAMERA
REBOOT)
OPTION SETTINGS (FACTORY
DEFAULT)
CAMERA SETTINGS (FOCUS
ASSIST)
USER SETTINGS
CAMERA SETTINGS (FOCUS
ASSIST/IRIS SETTINGS)
OPTION SETTINGS (FIRMWARE
UPDATE)
Introduction 7/17