Before Using Your Home Theater; Disc Playback - Samsung HT-KX20 Instruction Manual

Before Using Your Home Theater

To Operate your Samsung TV and the Home Theater
with the HT-KX20/HT-TKX22/HT-TKX25's Remote Control
The DVD Home Theater's remote can be used to control Samsung TVs.
1
Plug the main unit's power cord into the AC power supply.
• Before plugging your system into a main socket, you must checkthe voltage
setting (OPTIONAL). If the voltage of the socket doesnot correspond to the
setting on the rear of the unit, you mayseriously damage your system.
2
Press the TV button to set the remote to TV mode.
3
Press the POWER button to turn on your Samsung TV with this remote.
4
Press the TV/VIDEO button to select VIDEO mode on your TV.
VIDEO
5
Press the DVD RECEIVER button to switch to DVD RECEIVER mode to
operate the DVD Home Theater
6
Press the FUNCTION button on the main unit or DVD button on the remote
to enable DVD/CD playback.
24

Disc Playback

DVD
1
Press the OPEN/CLOSE button to open the disc tray.
2
Load a disc.
 Place a disc gently into the tray with the disc's label facing up.
3
Close the compartment by pressing the OPEN/CLOSE button again.
 Playback starts automatically.
d To stop playback, press the STOP button during playback.
 If pressed once, <PRESS PLAY> is displayed and the stop position will be stored in memory.
If the PLAY/PAUSE ( ) button or ENTER button is pressed, playback resumes from the stop position.
(This function works only with DVDs.)
 If pressed twice, <STOP> is displayed, and if the PLAY/PAUSE (
from the beginning.
d To temporarily pause playback, press the PLAY/PAUSE (
 To resume playback, press the PLAY/PAUSE (
• Depending on the content of the disc, the initial screen may appear different.
• Pirated discs will not run in this player because it violates the CSS (Content Scrambling System : a copy protec-
tion system) recommendations.
CD
) button is pressed, playback starts
) button during playback.
) button again.
GB
25