Selecting Scan Options - Samsung SF-555P User Manual

2.8
Scan Wizard

Selecting Scan Options

You can use the standard TWAIN window instead of the Samsung Scan
Manager window to scan an image. Also, if you have another scanner
driver installed on your computer, you can select the desired driver.
1. To open the Scan Option dialogue, select one of the following:
• In the Scan Wizard window, click the Options menu and then click
Scan.
• In the Image Manager window, click the File menu and then click
Scan Options.
• Open the SmarThru Configuration (see page 4.61) and then click
Scan Options in a tree on the left of the SmarThru Configuration
window.
2. The Scan Options dialogue allows you to set general options general for
all the scanners on your system.
You can select the
scanner driver. The
model names differ
depending on the
products.
Select the scanner
user interface you
wish to use when
you scan.
3. Save the currently changed scan option configuration.
Controls the scanning software behaviour,
when a document being scanned is smaller
than your scanner viewport area.
Select Left, if the document will be placed
along the left edge of your scanner viewport
area. Select Center, if the document will be
centred across the viewport area.
Once SmarThru Networking option is selected
when you install SmarThru software, you can
use these options to share the scanner over
a LAN. For details on these options, see
"Remote Scan Service" on page 2.34.