Adjusting the Custom Picture
Your set has several settings which allow you to control picture quality.
1
Press the MENU
Result:
The main menu is displayed.
2
Press the
or
Result:
The options available in the Picture group are
displayed.
3
Press the ENTER
4
Press the ENTER
Result:
The options available in the Mode group are displayed.
5
Select the option (Contrast, Brightness, Sharpness, Colour,
Tint) to be adjusted by pressing the
Press the ENTER
Result:
The horizontal bar is displayed.
In PC mode only Contrast and Brightness can be adjusted.
6
Press the
or
Press the ENTER
7
When you are satisfied with the setting, press the MENU
to return to the previous menu or press the EXIT button to return to
normal viewing.
The adjusted values are stored according to the selected
Picture mode.
Each adjusted setting will be stored separately according to its
input mode.
The Tint is "inactivated" as following cases.
• Analog mode (RF, Video, S-Video)
In case of an input signal setting to PAL-50, PAL-CN,
and SECAM.
• Component, DVI, and HDMI mode
In case of an input signal setting to 60 Hz; 480i, 480p,
720p @60 Hz, 1080i @60 Hz.
button.
button to select Picture.
button.
button again.
or
button.
button.
button to reach the required setting.
button.
button
English-23