Table of Contents
Advertisement
Switching On and Off
The mains lead is attached to the rear of your set.
1
Plug the mains lead into an appropriate socket.
Result:
The standby indicator lights up on the front panel.
The main voltage is indicated on the rear of your set and the
frequency is 50 or 60 Hz.
2
Press the POWER
Result:
The programme that you were watching last is reselected
automatically.
3
Press the number button (0~9) or channel up/down (
on the remote control or
the panel.
When you switch the set on for the very first time, you will be
asked to choose language in which the menus are to be
displayed (see page 14).
4
To switch your set off, press the POWER
Placing Your Television in Standby Mode
Your set can be placed in standby mode in order to reduce the power
consumption. The standby mode can be useful when you wish to
interrupt viewing temporarily (during a meal, for example).
1
Press the POWER
Result:
The screen is turned off and a red standby indicator
appears on the front of your set.
2
To switch your set back on, simply press the POWER
buttons (0~9) or channel up/down (
Do not leave your set in standby mode for long periods of time (when you are
away on holiday, for example).
It is best to unplug the set from the mains and aerial.
button on the front of the panel.
CH
button on the lower-right part of
button again.
button on the remote control.
/
) button again.
/
) button
, number
English-11
Hide quick links:
Advertisement
Table of Contents
