Memorizing The Channels - Samsung HP-T4264 Owner's Instructions Manual

Memorizing the Channels

Your TV can memorize and store all of the available channels for both "off-air" (air) and cable channels. After the
available channels are memorized, use the CH
the need to change channels by entering the channel digits. There are three steps for memorizing channels:
selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (manual).
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you must
specify the type of signal source that is connected to the TV (i.e. an air or a cable
system).
1 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Channel, then press the ENTER button.
2 Press the ENTER button select Antenna.
Press the ▲ or ▼ button to select Air or Cable, then press the ENTER button.
Press the EXIT button to exit.
Storing Channels in Memory (Automatic Method)
1 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Channel, then press the ENTER button.
2 Press the ▲ or ▼ button to select Auto Program, then press the ENTER
button.
3 Press the ▲ or ▼ button to select the antenna connection, then press the
ENTER button.
Air: "Air" antenna signal.
➢
Cable: "Cable" antenna signal.
Air+Cable: "Air" and "Cable" antenna signals.
➢ If the antenna is connected to ANT 2 IN (CABLE), select Cable and if it is
connected to ANT 1 IN (AIR), select Air.
If both ANT 1 IN and ANT 2 IN are connected, select the Air + Cable.
➢
If you selected Air, then go to step 5.
➢
4 Press the ▲ or ▼ to select the correct analog signal cable system source from
among STD, HRC, and IRC, then press the ENTER button. If you have Digital
cable TV, select the cable system signal source for both Analog and Digital.
➢ If you have Digital cable TV, select the signal source for both Analog and
Digital.
➢ STD, HRC, and IRC identify various types of cable TV systems. Contact
your local cable company to identify the type of cable system that exists in
your particular area. At this point the signal source has been selected.
5 The TV begins memorizing all available stations.
If you want to stop Auto Programming, press the ENTER button. The Stop
Auto Program? message will be displayed. Select Yes by pressing the ◄ or ►
button.
Press the EXIT button to exit.
The TV must be connected to antenna/cable in order to receive digital TV
➢
signals. Even if a particular channel is deleted from the memory, you can
always tune to that channel directly by using the number buttons on the
remote control.
• All available DTV and analog channels are automatically stored in
➢
memory.
• It takes approximately 3 to 10 minutes to memorize channels.
or CH button to scan through the channels. This eliminates
English - 19
T V Channel
Antenna : Air
Auto Program
Clear Scrambled Channel
Channel List
Name
Fine Tune
Signal Strength
LNA : On
Move Enter
T V Channel
Air
Antenna : Air
Cable
Auto Program
Clear Scrambled Channel
Channel List
Name
Fine Tune
Signal Strength
LNA : On
Move Enter
T V Channel
Antenna : Air
Auto Program
Clear Scrambled Channel
Channel List
Name
Fine Tune
Signal Strength
LNA : On
Move
Enter
T V Auto Program
Select the antennas to memorize.
Air
Start
Start
Cable
Start
Air + Cable
Move
Enter
T V Auto Program
Select the cable system.
Analog
Start
STD
HRC
IRC
Digital
STD
HRC
IRC
Move
Enter
Auto Program
Auto Program in progress.
Cable Channel 67
Stop
Return
Enter
Auto Program
Stop Auto Program?
68 %
Yes No
Return
Move Enter
►
►
►
►
►
►
►
►
Return
Return
►
►
►
►
►
►
►
►
Return
Return
Return
68 %